Conbextra HES FC501060-20KG

Conbextra HES FC501060-20KG
  • Conbextra HES FC501060-20KG

Conbextra HES

Conbextra HES is a shrinkage compensated cementitious grout used for free flow grouting in a wide range of applications where rapid strength gain is a pre-requisite. Conbextra HES has a compressive strength of 25 MPa @ 2 hours when mixed at flowable consistency.

FOSROC CONBEXTRA HES 20KG

Typical Applications

  • Grouting machine bases etc where very quick return to service is required

Advantages

  • Rapid strength gain facilitates rapid installation and operation of plant within a matter of hours
  • High strength gain is achievable even at low temperatures
  • Excellent initial flow and flow retention
  • Unique system compensates for shrinkage in hardened state
  • High ultimate strength and low permeability ensure durability of the hardened grout
  • Chloride free
  • Suitable for pumping or pouring over a large range of application consistencies and temperatures
  • 28 day strength @ 20°C dependent on consistency (cube samples) : 50-58MPa
  • Application method : Pump or pour
  • Chemical resistance : Not resistant to acids - use epoxy grouts
  • Flexural Strength (modulus of rupture) @ 28 days : 65MPa
  • Gap size : 15mm to 150mm
  • Indirect tensile strength @ 28 days : 30MPa
  • Service temperature : >200°C
  • Set time : 50 mins
  • Tack free time : 350mm

Enter dimensions of your application to caclculate the volume and the bag/kit quantity you will need.

Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.

enter the yield value as shown on the TDS
 

Overview

Typical Applications

  • Grouting machine bases etc where very quick return to service is required

Advantages

  • Rapid strength gain facilitates rapid installation and operation of plant within a matter of hours
  • High strength gain is achievable even at low temperatures
  • Excellent initial flow and flow retention
  • Unique system compensates for shrinkage in hardened state
  • High ultimate strength and low permeability ensure durability of the hardened grout
  • Chloride free
  • Suitable for pumping or pouring over a large range of application consistencies and temperatures

Key Properties

  • 28 day strength @ 20°C dependent on consistency (cube samples) : 50-58MPa
  • Application method : Pump or pour
  • Chemical resistance : Not resistant to acids - use epoxy grouts
  • Flexural Strength (modulus of rupture) @ 28 days : 65MPa
  • Gap size : 15mm to 150mm
  • Indirect tensile strength @ 28 days : 30MPa
  • Service temperature : >200°C
  • Set time : 50 mins
  • Tack free time : 350mm

Test Certificates

Application Guides

Spec Clause

Brochures

Product Calculator

Enter dimensions of your application to caclculate the volume and the bag/kit quantity you will need.

Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.

enter the yield value as shown on the TDS
 

Technical Data Sheet

Conbextra HES TDS

Safety Data Sheet

Conbextra HES SDS